Print Specification Sheet30cm (11″) diameter hardbacked table lamp shade, with an E27 (43mm) shade ring and a rolled fabric edge. Suits a lamp base that is approximately 30cm high (we recommend our ‘SPOKE’ table lamp base). Fabric is a black polyester satin.
27cm Black Satin Shade
27cm Satin-black Table Lamp Shade
30cm (11″) diameter hardbacked table lamp shade, with an E27 (43mm) shade ring and a rolled fabric edge. Suits a lamp base that is approximately 30cm high (we recommend our ‘SPOKE’ table lamp base). Fabric is a black polyester satin.
Availability: In Stock / Ex Warehouse
| Shipping Weight | 0.8 kg |
|---|---|
| Shipping Carton Dimensions | 30.0 × 33.0 × 33.0 cm |
| Brand | Oriel Lighting |
| Colour | BLACK |
| Globe Qty | 1 |
| Globe Type | E27 |
| Max. Wattage | 42W |
| Globe Included | NO |
| Recommended Globe | A-LED-7107240 |
| Voltage | 240V |
| Item Dimensions | T225 B275 H225 |
| Lamp Shade Colour | BLACK |
| Lamp Shade Material | Polyester Cotton |
| Lamp Shade Top Dim | 22.5 |
| Lamp Shade Bottom Dim | 27.5 |
| Lamp Shade Side Dim | 22.5 |
| Shade Fitting Type | Bottom |
| Primary Material | FABRIC |
| Supplier Code | OL91881 |
| UPI | 9324879220637 |
| In The Box | 1 x Shade |
| Warranty / Guarantee | 12 Month Replacement Guarantee |
Most of our loose lamp-shades are supplied with a SHADE ADAPTER RING – allowing it to be used with both BAYONET (B22) and Edison Screw (E27) lampholders.
The shade adapter ring (OLA16/SHADE) is a plastic ring which fits inside the 43mm opening of an Edison Screw (E27) lampholder reducing the size to approx. 28mm – for use with a Bayonet Cap (B22) lampholder.
For more information, contact your distributor.
If this fitting is supplied unassembled to reduce shipping cost and minimise damage, some assembly by the customer or the installing electrician may be required.
If this fitting requires installation, connection to the mains electrical supply, that installation must be performed by a licensed electrician in accordance with the wiring standard.
If this is a hardwired light fitting, and not specifically labelled “DIY” it must be installed by a licenced electrician.
OUTDOOR – if this is an outdoor fitting, it must be installed to the appropriate standard. Outdoor lights mounted on the wall or pillar will require the appropriate application of silicon sealant to ensure waterproofing.
GUARANTEE – The majority of our products come with a 12 month replacement guarantee.
In all cases, the product should be returned to the distributor / place of purchase.
CHANGE of MIND – We do not offer a “change of mind” guarantee – however many of our re-sellers do. In all cases contact the re-seller.
SPECIFICATIONS – From time to time we revise product specifications, including dimensions, globe type or maximum wattage. These changes do not constiture a fault under our guarantee.
